Analysis of concrete characteristics with the incorporation of construction waste aggregates
DOI:
https://doi.org/10.18011/bioeng.2022.v16.1075Keywords:
Concrete, rural construction,, SustainabilityAbstract
In order to reuse civil construction materials, research is carried out to obtain an efficient recycled concrete, promoting sustainability. The objective of this work is to compare the compressive strengths of the concrete specimen, with conventional and recycled aggregates, as well as the influence of granulometry on the strength and physical properties of the aggregates. For this purpose, aggregates from civil construction waste were incorporated into the concrete, replacing part of the coarse aggregates. Specimens were made with the following replacement percentages: 0%, 5%, 10%, and 15%, for multiple comparisons. The control group had no replacement of conventional aggregates by recycled ones (0%). The following tests were carried out: granulometric, density, water absorption, compressive strength, and slump test. Recycled concrete presents itself as a viable option in non-structural concretes, presenting greater efficiency in the compressive strength test at granulometry of 4.75 – 9.50 mm, with 15% incorporation.
Downloads
References
Alqarni, A. S., Abbas, H., Al-Shwikh, M., Al-Salloum, Y. A. (2021). Treatment of recycled concrete aggregate to enhance concrete performance. Construction and Building Materials, 307, 124960. http://dx.doi.org/10.1016/j.conbuildmat.2021.124960
Amario, M., Pepe, M., Rangel, C. S., Filho, R. D. T. (2021). Ferramenta analítica para avaliação do comportamento reológico do concreto agregado reciclado. Construction and Building Materials, 1(309), 1-13.
Associação Brasileira de Normas Técnicas. NBR NM 5738. (2016). Concreto - Ensaio de compressão de corpos de prova cilíndricos. Rio de Janeiro, RJ: Editora ABNT.
Associação Brasileira de Normas Técnicas. NBR 5739. (2018). Concreto - Procedimento para moldagem e cura de corpos de prova. Rio de Janeiro, RJ: Editora ABNT.
Associação Brasileira de Normas Técnicas. NBR 7211. (2019). Agregados para concreto - Especificação. Rio de Janeiro, RJ: Editora ABNT.
Associação Brasileira de Normas Técnicas. NBR 10004. (2004). Resíduos Sólidos – Classificação. Rio de Janeiro, RJ, Editora ABNT.
Associação Brasileira de Normas Técnicas. NBR 10007. (2004). Amostragem de resíduos sólidos. Rio de Janeiro, RJ: Editora ABNT.
Associação Brasileira de Normas Técnicas. NBR 16889. (2020). Concreto - Determinação da consistência pelo abatimento do tronco de cone. Rio de Janeiro, RJ: Editora ABNT
Associação Brasileira de Normas Técnicas. NBR 16917. (2021). Agregado graúdo - Determinação da densidade e da absorção de água. Rio de Janeiro, RJ, Editora ABNT.
Bauer, L. A. F. (1995). Materiais de Construção. São Paulo, SP: Editora S/A.
Bedoya, C., Dzul, L. (2015). Concrete with recycled aggregates as urban sustainability project. Revista Ingeniería de Construcción, 30(2), 99-108.
Conselho Nacional do Meio Ambiente (CONAMA). (2002). Resolução Nº 307 de 5 de julho de 2002.
Ehta, A., Siddique, R. (2016). An overview of geopolymers derived from industrial by-products. Construction and Building Materials, 127(1), 183-198. http://dx.doi.org/10.1016/j.conbuildmat.2016.09.136
Fonseca, T. D. S., Ribeiro Junior, L. U., Barbosa, L. F. (2018). Análise da viabilidade técnica da incorporação de agregados reciclados em concreto. Holos Environment, 18(1), 1-12. https://doi.org/10.14295/holos.v18i1.12035
Frontté, C., Núbia, C., Nagalli, A., Mazer, W. (2017). Estudo das propriedades físicas e mecânicas de concreto com substituição parcial de agregado natural por agregado reciclado proveniente de RCD. Revista Materia, 22(2), 1-17. https://doi.org/10.1590/S1517-707620170002.0143
Goldschmidt, S. A., Schneider, A. L., Pigozzo, T. A. J. (2018). Análise da substituição dos agregados graúdos convencionais por agregados reciclados no ensaio de resistência à compressão do concreto (Trabalho de Conclusão de Curso), Universidade Paranaense, Toledo, Brazil.
Hassan, R. Y., Faroun, G. A., Mohammed, S. K. (2021). Mechanical properties of concrete made with coarse and fine recycled aggregates. Materials Today: Proceedings, 1(1), 1-8. http://dx.doi.org/10.1016/j.matpr.2021.04.004
Jesus, S., Maia, C., Farinha C. B., Brito, J., Veiga, R. (2019). Rendering mortars with incorporation of very fine aggregates from construction and demolition waste. Construction and Building Materials, 229, 116844. http://dx.doi.org/10.1016/j.conbuildmat.2019.116844
Limbachiya, Mukesh., Dhir, Ravindra. (2000). Use of recycled concrete aggregate in high-strength concrete. Materials and Structures/Mat&Iaux Et Construction, 33(1), 574-580. https://doi.org/10.1007/BF02480538
Mcneil, K., Kang, T. H. K. (2013). Recycled Concrete Aggregates: A Review. International Journal of Concrete Structures And Materials, 7, 61-69. https://doi.org/10.1007/s40069-013-0032-5
R Core Team. (2015). R: A language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria. https://www.R-project.org/
Ripper, E. (1995). Como evitar erros na construção. São Paulo: Brazil: PINI.
Silva, G. R. (1974). Manual de traços de concreto. Rio de Janeiro: Brazil: ARTE E INDUSTRIA.
Sunita. (2021). Effect of biomass Ash, foundry sand and recycled concrete aggregate over the strength aspects of the concrete. Materials Today: Proceedings, 1(1), 1-8. http://dx.doi.org/10.1016/j.matpr.2021.09.405
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Revista Brasileira de Engenharia de Biossistemas
This work is licensed under a Creative Commons Attribution 4.0 International License.
Authors who publish in this journal agree to the following terms:
a) Authors retain the copyright and grant the journal the right of first publication, with the work simultaneously licensed under the Creative Commons Attribution License that allows the sharing of the work with recognition of authorship and initial publication in this journal.
b) Authors are authorized to assume additional contracts separately, for non-exclusive distribution of the version of the work published in this journal (eg, publish in an institutional repository or as a book chapter), with recognition of authorship and initial publication in this journal.
