SUPERVISION AND AUTOMATIZED CONTROL OF DRYING PROCESS THE AGRICULTURAL PRODUCTS THROUGH OF THE TERMICONT SOFTWARE

Authors

  • ALCEU ROSA NETO Engenheiro Eletrônico, R.A. Eletro Sistemas LTDA.
  • BÁRBARA TERUEL Prof. Dr. Eng. Mecânico, Faculdade de Engenharia Agrícola/UNICAMP.

DOI:

https://doi.org/10.18011/bioeng2008v2n1p71-79

Keywords:

Instrumentation, Temperature, Relative Humidity, Air Flow, Energy Consumption

Abstract

Is presented the software TERMICONT, for supervision and control of a drying plant, monitor-ing the temperature and relative air humidity, rotation speed of the engine of the fan and energy consumption. The drying plant was instrumented with temperature sensor, relative humidity and active power. The applicatory one was developed in LabView 7.11; with man-machine interface and easy visualization, configuration of control type, curves of the system (open and closed loop), mathematical model and study of control strategies. The control supervisory one could be used as tool of remote and local performance (Web Lab), the air flow and power and simultaneously the heating resistance, acquisition and storage of process data. The plant will be used for the research in instrumentation application and control of processes and didactic tool for the practical lessons in the agricultural engineering course.

Downloads

Download data is not yet available.

References

BROOKER, D.B; BAKKER-ARKEMA, F.W; HALL C.W. Drying and storage of grains and oilseeds. New York, NY: Van Nostrand Reinhold, 1992, 435 p.

GUZMÁN, J.L.; RODRIGUEZ, F.; BERENGUEL, M.; DORMIDO, S. Laboratorio virtual para la enseñanza de control climático de invernade-ros. Revista Ibero-Americana de Automática e Informática Industrial, Valencia, ESP, v.2, n.2, p.82-92, 2005.

JESUZ, J.C.; RADUNZ, L.L.; MELO, E.C.; ROCHA, R.P.; BERBERT, P.A. Automação do controle da temperatura do ar em seca-dor de plantas medicinais e aromáticas. In: CONGRESSO BRASILEIRO DE ENGENHA-RIA AGRÍCOLA – CONBEA, 30., 2001, Foz do Iguaçu, Paraná. Anais... Jaboticabal, SP: Associação Brasileira de Engenharia Agrí-cola, SBEA, 2001. Publicado emCR-Rom.

LIU, Q. & BAKKER-ARKEMA, F.W. A model-predictive controller for grain drying. Journal of Food Engineering, Davis, CA, v.49, p.321-326, 2001a.

LIU, Q. & BAKKER-ARKEMA, F.W. Automatic control of crossflow grain dryers, Part 3: field testing of a model-predictive controller. Journal of Agricultural Engineering Research, Silsoe, UK, v.80, n.3, nov. p. 245-250, 2001.

LIU, X.; CHEN, X.; WU, W.; ZHANG, Y. Process control based on principal componentanalysis for maize drying. Food Control,Elsevierv.17, p.894–899, 2006.

NATIONAL INSTRUMENTS, LabView. Inter-mediate I : successful development practices, course manual. Austin, TX: National Instru-ments , 2004. 320 p.

OGATA, K. Engenharia do controle moderno. 4.ed. São Paulo, SP Pearson Education do Brasil, 2005. 788 p.

PORTOGHESE, F.; BERRUTI, F.; BRIENS, C. Continuous on-line measurement of solid moisture content during fluidized bed drying using triboelectric probes. New York: Powder Technology, Elsevier , 2007 .

SANTOS, R.; BAUCHSPIESS, A.; BORGES, G. Laboratório remoto de automação predial.In:CONGRESSO BRASILEIRO DE ENSINO DE ENGENHARIA, COBENGE, 32., 2004. Brasília, DF .Anais...Universidade de Brasília, set. 2004. Disponível em: http://www.cobenge2004. nmi.unb.br/. Acesso em 20/12/2006.

SHABDE, V.S.; HOO, A.K. Optimum controller design for a spray drying process. Control En-gineering Practice, Elsevier, v.16, n.5, may, p. 541-552, 2008S

RZEDNICKI, G.S.; HOU, R.; DRISCOLL, R.H. Development of a control system for in-store dry-ing of paddy in Northeast China. Journal of Food Engineering, Davis, CA , v.77, p.368–377, 2006.

TRAVIS, J. Internet: applications in LabView. New Jersey: Prentice Hall, 2000. 250 p.ZANOELO E.F.; ABITANTE, A.; MELEIRO, L.A.C. Dynamic modeling and feedback con-trol for conveyors-belt dryers of mate leaves. Journal of Food Engineering, Davis, CA , v. 84, p.458–468, 2008.

Published

2008-04-15

How to Cite

ROSA NETO, A., & TERUEL, B. (2008). SUPERVISION AND AUTOMATIZED CONTROL OF DRYING PROCESS THE AGRICULTURAL PRODUCTS THROUGH OF THE TERMICONT SOFTWARE. Revista Brasileira De Engenharia De Biossistemas, 2(1), 71–79. https://doi.org/10.18011/bioeng2008v2n1p71-79

Issue

Section

Regular Section